Complete Machinery from Start to Finish
Services Offered by Our Machine Shop in North Vancouver
Introduction
For machining services, contact our machine shop in North Vancouver. All of our equipment is modern and fitted with digital readouts for added precision. We have a wide assortment of machines to complete your planned project, including conventional and CNC lathes, a horizontal boring mill and conventional milling machine, a CNC vertical machining center and welding machines, as well as gear cutters, a slotter and a drill press. Our machine shop is certified under CWB 47.1 for welding steel structures and we are capable of the following operations:
| Turning | |
|---|---|
| Vertical: | Up to 63" diameter X 39" long |
| Horizontal: | Up to 34" diameter X 157" long (44" gap) |
| CNC: | Up to 30" diameter x 60 centers- 18" over cross slide |
| Milling | |
| Conventional: | 2 1/2" diameter spindle - 12" X 52" table |
| Horizontal Boring: | 3 1/8" diameter spindle - 45" X 50" table |
| CNC: | Table:14 « x 58" Travel: X=40", Y=20" Z=16" Nose-Table:4"-20" |
| Drilling | |
| Radial Arm: | Up to 4" diameter X 63" arm |
| Gear Cutting & Slotting | |
| Gears up to 3 DP, 36" diameter internal x 6" face | |
| Gears up to 3 DP, 40" diameter external x 6" face | |
| Splining and slotting | |
Shop Equipment
| Conventional Lathes | |
|---|---|
| Kingston HR 4000 | 44" gap x 34" diameter x 157" centers - 25" dia. over cross slide |
| Kingston HL 2000 | 28" gap x 21" diameter x 80" centers; 13" dia. over across slide |
| Kingston HD 26120 | 35" gap x 26" diameter x 120" centers; 17 1/2" dia. over across slide |
| Stanko 1516 VTL (Vertical) | 63" diameter x 39" high - 5 position turret |
| CNC Lathes | |
| HAAS ST-20 | 15" diameter x 21" turning length, 31.75" swing diameter |
| Horizontal Boring Mill | |
| Union BFT 80 | 44" x 49" table - Travel: X = 47", Y = 47", Z = 62"3" diameter spindle x 28" travelTailstock: 88" max; spindle to tailstockRotary table and facing head |
| Conventional Milling Machine | |
| Fortworth CS-V450B | 12" x 51" table - travel: X = 12 5/8", Y = 37 7/16", Z = 18"4 1/2" diameter spindle x 5 1/8" travelUniversal head (+/- 45 degrees) |
| STANKO | |
| CNC Vertical Machining Center | |
| HAAS VF-5 | Table Size: 23" x 52"Travel: X = 50", Y = 26", Z = 25"Spindle Nose to Table: max = 32.90" min = 7.90"Fourth axis rotary table |
| Gear Cutters | |
| Fellows 36-6 | Up to 36" diameter x 6" face width - 3 DP |
| Slotter/Keyseating | |
| Rockford SA-12 | 12" stroke |
| Hansford Davis Model 15 | 1/16” to 1 ½” capacity |
| Drill Press | |
| Raboma 12V1600 | Max. drill capacity: 4" diameterColumn face to spindle center: 5" min, 64" maxSpindle to base: 63" max |
| Welding Machines | |
| Miller Delta Weld 450 | 450A, c/w wire feeder |
| Miller XTM 304 | 300A, c/w wire feeder |
| Miller Syncrowave 300 | 350A TIG welder |
| Hypertherm plasma cutter | Up to 3/4" plate |
| FASTCUT CNC Plasma table | 60” x 120” table size |
| Rotary weld positioner | |
| Koike track burner | |
| Shop Equipment | |
| 50 ton H-frame press | |
| 30 HP hydraulic power unit | |
| Hydraulic tube bender | JD Squared Model 4 bender |
| Hydraulic hose crimper | Aeroquip FT 1380 hydraulic crimper |
| Climax Portable Key Mill | KM3000 1.25” wide x 6” long shaft diameter 0.75”-10.5” |
| SKF Induction Bearing Heater | TIH 100m |
